Dropship 4 Way Connector Wire Pole Push Reusable Terminal Block Electric

The 4 Way Connector Wire Pole Push is an innovative solution for all your electrical wiring needs. Designed to replace traditional wire nuts, this reusable terminal block offers a reliable and efficient way to connect wires. Rated for 400V at 24A, it is compatible with 18-12 AWG solid or stranded wires, making it versatile for various applications.

Key Features

One of the standout features of the 4 Way Connector is its ability to splice up to six solid or stranded wires. This makes it ideal for complex wiring projects where multiple connections are required. The push-wire connection clamps can accommodate stranded wires with a cross-section of up to 10 AWG, ensuring a secure and stable connection.

Using the 4 Way Connector can save you up to 50% in wiring time compared to traditional twist-type connectors. This efficiency is particularly beneficial for professionals and DIY enthusiasts who value speed and reliability in their electrical work. Enter the No-Twist Zone and simplify your next wiring project with this original push wire connector.

Easy to Use

Installation is straightforward with the built-in strip-length gauge, which indicates that you should strip the conductor to 12 mm (0.47 inches). Once stripped, simply insert the conductor firmly into the connector. The transparent housing allows you to check for complete insertion, ensuring that your connection is secure and reliable.

The PUSH WIRE connectors are designed to clamp solid and stranded copper conductors, providing a strong and stable connection. The conductor cross-section ranges from 0.75 to 2.5 mm (square hard wire), making it suitable for a variety of wiring tasks.

Specifications

Here are some important specifications of the 4 Way Connector Wire Pole Push:

• Rated Voltage: 400V
• Current Rating: 24A
• Rated Impulse Voltage: 4KV
• Strip Length: 12-13mm
• Type: 4-Pole
• 4-Pole Volume Size: Length: 13.1mm, Width: 13.0mm, Height: 19.5mm

Product Manual

The product manual provides clear instructions for use. For optimal performance, strip the wire to a length of 12-13mm and insert it into the connector. For demolition, cut the power supply lines to a length of 15-30mm and use pliers to gently pull the wire out of the connector.

Package Includes

Each package includes one 4-Pole Pushwire Connector, ensuring you have everything you need for your wiring project. Please note that the item color displayed in photos may vary slightly due to monitor calibration differences.

For more information, please refer to our Terms and Conditions.